单位里的宝德PT6310服务器,一天突然断电后重新启动,出现内存报错信息,如下:
Errror(8502):Bad memory in DIMM
Press…F1 to Resume, F2 to run setup
按F1后能够顺利进入系统,看了下系统属性,发现内存大小只有512M,本来应该是1G的内存。于是关机,打开机箱重新插拔内存条,再开机还是出现同样的内存报错信息,按F2进入BIOS设置,找到有关内存的设置项,在Aduanced之下的Memory Configuration里面,其内容如下:
DIMM
DIMM 1B [Installed]
DIMM
DIMM 2B [Not Installed]
Exteded Memory Test [disabled]
Memory Retest [disabled]
Memory Retest Feature [Enabled]
Memory Sparing [disabled]
将Memory Retest(重新检测内存)一项设置为Enabled,保存设置重新启动电脑,没有出现报错信息,正常进入系统,进入系统发现内存又变为1G了。
小结:造成该故障的原因可能是服务器在运行过程中非正常关机,导致内存错误,其中一个内存条被标记为有故障。
原创文章,如需转载,请注明出处:
本文转自:晓宁博客 [ http://www.grnnet.com ]
原文地址:http://www.grnnet.com/post/122.html
原创文章如转载,请注明:转载自晓宁博客〖http://www.grnnet.com/〗
本文链接地址:http://www.grnnet.com/post/122.html


